| Product |
Preload Instructions
|
| 01/W Series |
Global screen 7 Press G then E |
| 03R/W |
Global screen 5D, then select “OK”. |
| 05R/W |
Global Screen 5A, then select “OK”. |
| 168RC |
Factory data must be transmitted and returned via SysEx dump. |
| A1 |
Card Load only from a SPC0A1 (Card no longer available) |
| A2/A3 |
Hold Up and Down arrows while turning it on. |
| A4 |
Hold Bank Up and Write while turning it on. PL appears, press write again. |
| A5 |
Hold Mode Footswitch and Write while turning it on. Press Footswtich 1, F is dispayed on screen. |
| AD120VT |
Preload - Hold down the value Up/Down button and TUNER/CANCELL. A 'P' will flash in the LED. Press the write button |
| AX1000G |
Hold Bank footswitch and Exit button while turning it on. Press Write button to load the factory programs. |
| AX100G |
Hold FX Select and EXIT button while turning it on. Press write button. |
| AX1500G |
Hold down Bank footswitch EXIT button while turning it on. Then press Write button. |
| AX1G/B |
Hold down the left arrow key and the "+ " while powering on. Then press the "+" button again. |
| AX300G/B |
Hold Param/Value and Compare/Write while turning it on. Then Compare/Write once again. |
| C-Series |
Disk Load C900 (CFD01P) Ci86/9600 (CID00PE ) |
| CX-3 |
Hold Program 2 and 7 while turning it on. |
| D Series |
Backup CDs |
| EX8000 |
From Tape only (Contact us via the support form for more information)
|
| G3 |
Hold Bank and Write while turning it on. Release both and then press Write again. |
| i1/i2/i3 |
Disk Load (IFD01P for i3 and i2, IFD02P for i1) |
| I30 |
Disk Load (I30FD00P) |
| i5S/M |
Disk Load (IFD00P) |
| iS35/40/50/B i40M |
Disk Load (IFDD1006 except for iS40 and i40M which is IFDD1007) |
| iX300 |
Disk Load (IXD00P) |
| KAOSS Pad |
N/A |
| KARMA |
Disk Load (KMFD00P) |
| M1 |
Card Load (MPC00P) or Sysex Dump. Please contact support for information on how to send data via Sysex. (Card no longer available) |
| M1R/M1REX |
Card Load (MPC00P, MPC0EX for EX model, no longer available) |
| M3R |
Global screen 5D “OK”, then select "OK." |
| MS2000/2000R |
Global screen 2D, then select "OK". |
| N1/N5/EX |
Press Utility, select "Factory Reset" then press Enter. |
| N1R |
Press Global, Page > to Init. Select "Factory Preload" then press Enter. |
| N364/N264 |
Disk Load (NSD3) |
| NX/NS5R |
Enter button, then select Utility, Preset, Factory Preset, Yes. |
| PA80/60 |
Disk Load (6 Disk set available from www.korgpa.com) |
| Prophecy |
Global screen 19, press Enter. |
| PX1 |
Metronome and Enter buttons while powering on. Then press the "+" button. |
| PX2 |
Rhythm and Enter buttons while powering on. Then press the "+" button. |
| PX3/PX3B |
PX3: Rhythm/Aux and "+" button while powering on. Then press the Bypass/Tune button. PX3B: HBB and "+" button while powering on. Then press Bypass/Tune. |
| PX4/PX4B |
PX4: Rhythm and UP arrow buttons while powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons while powering up. Then press press Enter/Rec. |
| S3 |
Hold Stop and S1 while turning it on. |
| SG Rack |
Global screen 7, then select "OK". |
| SGPROX |
Program Edit mode screen 14 (Each program!) |
| SP500 |
Function screen 7. |
| T Series |
Disk Load (TSD00PII) |
| Trinity Series |
Disk Load (TFD00P and TFD01P) |
| Triton Classic/ST |
Disk Load (TNFD00P and TNFD01P for Classic, Hard Drive contains preload for Studio) |
| Triton LE |
Global mode, F8, Select "Preload" then OK |
| Triton Rack |
Disk Load (TNRFD00P and TNRFD01P) |
| TR Rack |
Global screen 10, then select "OK". |
| WS/WSEX/AD |
Card Load (WPC00PI, II and III) |
| WSSR |
Card Load (WPC00PI, II and III) |
| X2/X3/X3R |
Disk Load (XSD00P) |
| X5/X5D/DR |
Global Screen 5A, then select “OK”. |
| Z1/Z1EX |
Preload screen in global mode. |
